Muller Evaporator MMT Muller Medium Temperature

Evaporator Muller MMT

Evap MullerSetara Evap
WONGSO
MMT030-NC
MMT039-NC
MMT 044WDL 3.0/15
MMT059-NC
MMT082-NCWDL 8.0/40
MMT093-NCWDL 8.0/40
MMT098-NCWDL 11.2/55
MMT 105
MMT122-NCWDL 11.2/55
MMT139-NC
MMT158-NCWDL 11.2/55
MMT172-NCWDL 16.2/80
MMT183-NCWDL 16.2/80
MMT201-NCWDL 21.3/105
MMT216-NC
MMT235-NC
MMT259-NC
MMT017H-NC
MMT021H-NC
MMT026H-NCWDL 2.1/10
MMT035H-NCWDL 3.1/15
MMT044H-NCWDL 3.0/15
MMT049H-NCWDL 5.0/25
MMT053H-NCWDL 5.0/25
MMT066H-NCWDL 8.0/40
MMT078H-NC
MMT087H-NC
MMT105H-NCWDL 11.2/55
MMT030H-NC
MMT039H-NC
MMT059H-NC
MMT082H-NCWDL 8.0/40
MMT093H-NCWDL 8.0/40
MMT098H-NCWDL 11.2/55
MMT122H-NCWDL 11.2/55
MMT139H-NC
MMT158H-NCWDL 11.2/55
MMT172H-NCWDL 16.2/80
MMT183H-NCWDL 16.2/80
MMT201H-NCWDL 21.3/105
MMT216H-NC
MMT235H-NC
MMT259H-NCWDL 21.3/105
  • Extended model and capacity range
    -Medium Temp range: 26 models, 1 ~ 5 fans, 1.6 ~ 24 kW
    The drain tray is reversible with new 32 mm threaded fitting
  • Larger hanger bars with clawed feet are located in the cabinet
  • New cabinet design features easy front opening access to electrical panel and a separate panel for refrigeration components
  • The electrical board is front facing for easy access and the terminal board simplifies wiring
  • Lanyards are included to hold the drain tray
  • Options
    Designed and built for Commercial Refrigeration Applications, we are able to supply the following options:
    –  Medium temperature models with electric defrost
    –  Fin space in 4, 5, 6 FPI (4.23, 5.08, 6.35 mm)
    –  Fin coating, stainless steel casing

Defrost time for average loads should be approx. 20-25 minutes including drainage. Time will vary with varying degrees of ice-up. Time termination should be set to ensure complete defrost at the heaviest load condition. Typically allow 25-30 minutes with safety reset at 35 minutes. Temperature termination setting depends on frequency and and severity of defrost, and location of the senseing device. If using standart frezeer thermostat, the defrosting guidelines above should be used.